One question reaches our Sialkot workshop more than any other: how is a WBC belt made? We’ve made championship belts since 2002. This post follows one silver mold cast WBC style belt through the workshop, in the order the work happens.
Our belt is an unofficial replica, not a WBC product. The World Boxing Council formed in Mexico City in 1963, and I can’t tell you how it makes its own belts. I can show you how we make ours.
Key Takeaways
- How is a WBC belt made? The slow work happens before you order. We finish the die, the gold plating and the flag painting in advance.
- A silver mold cast belt takes 6 to 8 working days when the plates are in stock.
- An exact WBC shape needs an exact die, and we spend months getting it right.
- After you order, we make the side plates with your photos, sew the strap and fit the belt.
Table of Contents
How Is a WBC Belt Made, Start to Finish?
A die shapes each plate. We then gold plate the plates and paint the flags by hand. After you order, we make the side plates and the strap and fit everything together.

Most of the work is done before you order. That’s why a silver mold cast belt takes only 6 to 8 working days when the plates are in stock.
Here is the order of work:
| Stage | When it happens | What we do |
|---|---|---|
| Die and plate shaping | Before your order | We spend months getting the shape exact |
| Gold plating | Before your order | We plate each plate with good quality artificial gold |
| Flag painting | Before your order | We paint every flag by hand |
| Side plates | After your order | We make them with the boxer photos you choose |
| Strap | After your order | We cut and sew leather from stock |
| Fitting | After your order | We join the plates and strap into one belt |
| Photos and video | After your order | We send them so you can check the belt before it ships |
Why Does a WBC Belt Start With a Die That Takes Months to Make?
A die is the tool that gives a plate its exact shape. We spend months getting ours right, because a plate can only be as accurate as the die behind it.
Plenty of people ask, “How is a WBC belt made?” and assume any shape is easy to make. It isn’t. An accurate die makes an accurate belt, and a rough die gives you a rough plate.

What Makes Us Reject a Plate?
We reject a plate when its quality is poor. Gold plating can’t fix a poor shape, so the plate has to be right first.

Etched Brass or Mold Cast: How Is the Plate Made Differently?
We cut an etched plate from 4mm brass sheet, and a die shapes a mold cast plate. That gives two answers to “How is a WBC belt made?” Etched belts take 8 to 15 working days, and cast belts take 6 to 8.
| Method | How we make the plate | Making time | Price |
|---|---|---|---|
| Etched brass | We measure and cut 4mm brass sheet | 8 to 15 working days | $184 |
| Silver mold casting | A die shapes the plate | 6 to 8 working days, plates in stock | $200 |
Cast is faster when the plates are in stock. The $16 price gap is small, so time is the bigger difference.
If you’re still deciding, read how to choose between etched and cast in our WBC belt guide. Our post on brass and zinc plate materials covers the metals.

How Is a WBC Belt Plate Gold Plated?
We gold plate each finished plate with good quality artificial gold. It’s a gold-colored finish, not solid gold.
Real gold isn’t standard on a title belt anyway. An auction listing for an unissued official WBC belt describes a brass center plate.
The plating is only as good as the plate under it. That’s why we spend the months on the shape first.
Care matters too. If you keep the belt in open air with a fan running, the plating lasts a long time. Our guide on how to store a championship belt has more.

How Are the Flags on a WBC Style Belt Painted?
By hand. We paint every flag ourselves before you order, so the flags don’t add to your wait.
The WBC’s own belt timeline shows the flags growing from two rows on the third generation to three lines on the fourth. A ring of flags that detailed takes time, so we paint ours in advance.

How Is a WBC Belt Made After You Place an Order?
We take the finished plates from stock, make the side plates with your photos, sew the strap and fit everything together.
- We take the finished plates from stock. We already shaped, plated and painted them.
- We make the side plates with the boxer photos you choose.
- We cut and sew the strap from leather and buckles in stock.
- We fit the plates to the strap.
- We send you photos and video of the finished belt.
- We pack it and ship it.
Only the side plates, the strap and the fitting wait for your order.
How Are the Side Plates Made With Your Photos?
You pick the boxers, and we make the side plates with their pictures. Our WBC style championship belt with custom photo medallions shows the result.

How Is the Strap Cut and Sewn?
We keep leather and buckles in stock. We cut the leather and sew the strap together ourselves.

What Happens at Fitting, and Can You Still Change Details?
Fitting is when we join the plates and strap into one belt. Ask for changes before it starts, because that’s when they’re quick.
One customer messaged us to change the nameplates. We hadn’t started fitting yet, so we made the change quickly.

You pay nothing to place an order. We confirm every detail with you on WhatsApp first.
WBC Belt Making FAQ
How is a WBC belt made?
A die shapes each plate, then we gold plate it and paint the flags by hand. After you order, we make the side plates, sew the strap and fit everything together.
How long does it take to make a WBC style belt?
A silver mold cast belt takes 6 to 8 working days when the plates are in stock. An etched brass belt takes 8 to 15 working days.
What parts of a WBC style belt are made by hand?
We paint the flags by hand. We also cut the leather and sew the strap ourselves.
How long does gold plating on a belt last?
It lasts a long time if you keep the belt in open air with a fan running. Good quality gold on a well-shaped plate helps too.
What is a WBC style belt made of?
Metal plates with gold plating, a leather strap and a buckle. Our etched plates start as 4mm brass sheet.
Can I change the nameplates after I order?
Ask us. If fitting hasn’t started, we can change them quickly, as we did for one customer.
Written by Ibrahim Zaheer, Retro Shields. Our Sialkot, Pakistan workshop has made championship belts since 2002.




